OTC Heavy-Duty Special Tools

1975 2" Truck Pinion Locknut Sockets Sockets have 3" of useable depth, 4" overall length.   Eliminates modifying standard socket to provide necessary clearance.   All of the following are 3/4" drive, 6pt. sockets. Image files: HiQual Image LoQual Image

1976 2-1/8" Truck Pinion Locknut Sockets Sockets have 3" of useable depth, 4" overall length.   Eliminates modifying standard socket to provide necessary clearance.   All of the following are 3/4" drive, 6pt. sockets. Image files: HiQual Image LoQual Image

1977 2-1/4" Truck Pinion Locknut Sockets useable depth, 4" overall length.   Eliminates modifying standard socket to provide necessary clearance.   All of the following are 3/4" drive, 6pt. sockets. Image files: HiQual Image LoQual Image

1978 2-3/8" Truck Pinion Locknut Sockets Sockets have 3" of useable depth, 4" overall length.   Eliminates modifying standard socket to provide necessary clearance.   All of the following are 3/4" drive, 6pt. sockets. Image files: HiQual Image LoQual Image

1979 2-5/8" Truck Pinion Locknut Sockets Sockets have 3" of useable depth, 4" overall length.   Eliminates modifying standard socket to provide necessary clearance.   All of the following are 3/4" drive, 6pt. sockets. Image files: HiQual Image LoQual Image

1980 2-3/4" Truck Pinion Locknut Sockets Sockets have 3" of useable depth, 4" overall length.   Eliminates modifying standard socket to provide necessary clearance.   All of the following are 3/4" drive, 6pt. sockets. Image files: HiQual Image LoQual Image

5044 Self-Adjusting Clutch Rotating Tool Replaces self-adjuster mechanism on Spicer® self-adjust clutches. Image files: HiQual Image LoQual Image

5045 Drive Pin Installing Tool Makes for precise alignment and proper installation of the spacer plate drive pins on the pot type 14" flywheel. Image files: HiQual Image LoQual Image

6075 Chrysler Crankshaft Damper Remover/Installer Kit Services Chrysler-built 2.0L, 2.4L, 2.5L, and 3.5L engines.   The 3-jaw puller is used with the insert to remove the crankshaft damper whenever timing belt, water pump, or front cover service is required. The tool kit includes a damper installing tool with bearing.   Application: 1995-newer 3.5L V-6 used in Chrysler New Yorker and Concorde, Dodge Intrepid, and Eagle Vision; 1995-newer 2.0L, 2.4L 4-cyl. and 2.5L V-6 used in Cirrus, Stratus, and Breeze; 1995-newer 2.0L 4-cyl. used in Neon. Image files: HiQual Image LoQual Image

7028 HD Clutch Adjusting Wrench Weight:    1 lb., 8 oz. Used for the internal adjustment of Spicer angle-spring and multiple-lever clutches. Image files: HiQual Image LoQual Image

7057 Spicer® U-Joint Service Set Services Spicer 1600/1610 – 1880 series U-joints; and Rockwell 16N, 17N, 18N, and 1710 series U-joints. Image files: HiQual Image LoQual Image

7069A Heavy-Duty Truck Brake Spring Plier Weight:    4 lbs., 8 oz. Tool’s 26-1/4" length gives the leverage you need.   Large jaw opening allows service of widest shoes.   Has replacement tip. Image files: HiQual Image LoQual Image

7071 Differential Housing Spreader Helps in removing and installing the differential ring gear assembly from the carrier on Dana axle models 30 through 70. Image files: HiQual Image LoQual Image

7077 Axle Stud Cone Plier Specially designed pliers gives you the leverage needed to expand the cone and remove it from the stud for axle removal. Image files: HiQual Image LoQual Image

7490 U-Joint Tool Weight:    10 lbs., 7 oz. Easily removes stubborn heavy-duty U-joints on Dana and Rockwell® driveshaft assemblies. Image files: HiQual Image LoQual Image